Linear Vibrating Screen Performance Affects Screening Efficiency

In terms of process performance, the factors affecting the screening efficiency of the linear vibrating screen mainly refer to the screen surface structural parameters. When the feeding amount and screening conditions are constant, the screen surface width of the linear vibrating screen determines the processing capacity of the linear vibrating screen, and the screen surface length determines the screening efficiency.

Usually, the width of the screen surface of the linear vibrating screen is generally less than 2.5m, and the width of the vibrating screen of the large-scale linear vibrating screen can even reach 5.5m. However, due to the limitation of the screen frame structure and material strength, the screen width of the linear vibrating screen cannot be infinitely widened, and the length cannot be lengthened arbitrarily. Generally, the preferred aspect ratio of the screen surface is 2-2.5.

Daily operation and management will also affect the screening efficiency of the linear vibrating screen. During daily operation, the linear vibrating screen needs to maintain uniform, continuous and appropriate feeding to ensure that the material is evenly distributed along the entire width of the screen surface. This is conducive to the through-screening of fine particles, so as to obtain higher processing capacity and screening efficiency.

During routine maintenance, operators need to pay special attention to the tightening of the screen surface. At the same time, repair the part of the peeling paint in time, and do a good job in the maintenance and rust prevention of the linear vibrating screen. Clean the screen surface in time and repair and replace the damaged screen surface. In addition, the linear vibrating screen operator should find problems and hidden dangers and eliminate them in time, which not only ensures the safe operation of the equipment in good condition but also effectively controls the maintenance cost of the equipment.