The Commonly Terms In The Sand And Gravel Industry
The sand and gravel industry has risen, but there are still many businesses that do not understand the professional terms of this industry. This article will introduce the commonly used terms in the sand and gravel industry in detail.
1. High-Performance Concrete
Taking the specific requirements for concrete performance in construction engineering design and construction as the overall goal, select high-quality conventional raw materials, reasonably add admixtures and mineral admixtures, use a lower water-binder ratio and optimize the mix ratio, adopt green ready-mixed production methods, and strict The construction measures to make concrete with excellent mixture performance, mechanical properties, long-term performance, and durability.
2. Aggregate
Granular loose materials such as rock particles that act as skeletons, filling and stabilizing volume in concrete. According to the particle size, it can be divided into coarse aggregate and fine aggregate.
3. Natural Sand
Rock particles with a nominal diameter of less than 5.00mm formed by natural conditions. According to different sources of production, it can be divided into river sand, lake sand, sea sand, and mountain sand.
4. Artificial Sand
Rocks, pebbles, mine tailings, or industrial wastes are excavated, mechanically crushed, and sieved. Rock particles with a nominal diameter of less than 5.00mm.
5. Crushed Stone
Rock particles with a nominal particle size greater than 5.00mm, obtained by crushing and screening natural rocks or pebbles.
6. Gravel
Rock particles with a nominal diameter greater than 5.00mm formed by natural conditions.
7. Dust Content
The aggregate content of particles with a nominal particle size of less than 80μm, including clay, silt, and fines.
8. Clay Lump Content in Sand
The nominal particle size in the sand is greater than 1.25mm, and the content of particles less than 0.63mm after washing and hand kneading.
9. Crusher Dust Content
The artificial sand has a nominal particle size of less than 0.08mm, and its mineral composition has the same particle content as the processed parent rock.
10. Apparent Density
The mass of aggregate particles per unit volume (including internal closed pores).
11. Tight Density
Aggregate is the mass per unit volume after being solidified according to the prescribed method.
Send Message
Please write down your requirement and contact details in the following form. You can also send a message to us by this email export@lylzzg.com, we will reply to you within 24 hours.