The Applications And Working Principle of Three Axis Horizontal Screen

The three-axis horizontal screen uses three groups of vibrators as excitation sources. The motion trajectory of the screen box is a linear ellipse, and the materials make a linear elliptical motion on the screen surface. The three-axis horizontal vibrating screen is suitable for dry and wet screening of coal, mines, and sand and gravel aggregates. The vibration amplitude, vibration frequency, and vibration direction angle of the equipment can be adjusted according to different requirements.

Structure of three-axis horizontal screen

The three-axis horizontal vibrating screen is mainly composed of screen frame, spring, bottom frame, vibrator, transmission device, motor, screen, etc.

Working principle of three-axis horizontal screen

The vibrator of the three-axis horizontal screen is composed of three parallel vibration shafts. One end of the vibration shaft located on one side of the screen box is equipped with three intermeshing gears with a speed ratio of 1. When the vibrating screen is working, the motor transmission device drives the three gears of the vibrator to rotate. Since the three axes are equipped with equal eccentric masses and equal eccentric radius weight plates, and are synchronously connected by gears with equal parameters, the motion trajectory of the screen box is elliptical. That is, the synthetic motion trajectory of the circular motion trajectory of the single-axis vibrating screen and the linear motion trajectory of the dual-axis vibrating screen. The elliptical motion trajectory allows the material to run at a greater speed and improves the output of the equipment.

Advantages of three-axis horizontal screen

1. Three-axis horizontal vibrating screen has the advantages of a linear vibrating screen and a circular vibrating screen. It has good screening performance, large processing capacity, high screening efficiency, and horizontal installation.

2. Compact structure, small footprint. The processing capacity is 70% higher than that of the same model of vibrating screen.

3. The motion trajectory of the three-axis horizontal screen is elliptical, which is a combination of the circular motion of the single-axis screen and the linear motion trajectory of the two-axis screen.

4. The long axis can project materials. The short shaft can clean the screen holes.